6ACM0003:Mechanics and Properties of Materials - Engineering Assignment Help

Assignment Task:

Task:

This Assignment assesses the following module Learning Outcomes (Take these from the module DMD):
1. Identify the types, properties and manufacture of composite materials.
2. Recognise modes of failure in engineering materials.
3. Limit the occurrence of failure in materials by appropriate modelling, design and materials selection.
4. Apply analytical methods to structural components subjected to complex stress/strain fields.
 

Assignment Brief: Three-point bend tests will be undertaken to calculate experimentally the flexural Young’s modulus (E) of continuous carbon fibre composites of different stacking sequence. Each sample is made up of sixteen plies. Four samples of stacking sequence (i) [0] 16 , (ii) [90] 16 (iii) [+45/-45] 4s and [0/90/+45/-45] 2s will be tested. By using the rule of mixtures, the 10% rule and the following data, calculate the theoretical Young’s modulus for each sample. The data to be used for this calculation are as follows: E fibres = 206 GPa, V fibres = 0.6, E matrix = 3.5 GPa and V matrix = 0.4. From these data, you must calculate the Young’s modulus for the [0] 16 sample first. Then you can apply the 10% rule to obtain the Young’s modulus for the other samples. The Young’s modulus will also be calculated from experimental data that will be obtained from the 3-point bend test. The width and thickness of each sample will be measured at three different points using a Vernier caliper. The average of these measurements will then be calculated. The 3-point bend test will then be carried out for each sample by applying a force (in N) that will give a corresponding deflection (in mm).

This 6ACM0003 : Engineering   Assignment has been solved by our Engineering  Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.