BME108S: Pumps, Seals and Compressors - Mechanical Engineering Assignment Help

Assignment Task:

Assessment Task Instructions: 

1. To allow for unforeseen circumstances such as illness, work or family commitments, it is advisable that you aim to complete the assessment a few days before the due date. It is your responsibility to ensure that you factor in any time difference between Perth, Western Australia and your location when submitting assessments. 

2. Extension requests must be formally submitted by completing an extension request form and emailing the form to your unit coordinator along with a medical certificate or other supporting documentation. 

3. Assessments must be submitted through TurnitIn (unless otherwise stated). 

4. Only one (1) file can be submitted in Part 1 as your main written submission. 

* Supplementary or additional appendices must be clearly titled and directly submitted into the Supporting Documents Tab in the TurnitIn submission box. Should the assessor not be able to clearly link these documentations back to your main assessment, penalties may apply. 

5. You must use the provided assessment Cover Page document and submit as your main written assessment in WORD FORMAT only. The only permissible file formats are .docx or .doc and you should not ‘embed’ other files as pictures within the word document. 

* Supplementary documents can be in other formats such as Word, PDF, Excel, Powerpoint etc. 

6. You must correctly title your documents.

7. You must reference all content used from other sources. Do not copy and paste from course materials or any other resources or quote another source without referencing. 

8. Assessments submitted through emails or any other methods will NOT be accepted. 

9. You must ensure that you have submitted the correct file. Once you have submitted, you will not be able to re-submit a second attempt after the due date. 

10. Important note: Failure to adhere to these requirements may result in a zero grade. Please refer to the unit outline or EIT Policies & Procedures if you are unsure how to reference. 

Question 1: (40 marks) 

You are required to prepare a report for your client for the following task: 

It is required to select a pump for the following requirements: 

• Transported medium is trash water containing sand. 

• Discharge capacity: Q = 5 l/s 

• Geodetic height (= height to which the transported medium must be pumped) Hgeo = 4 meters 

• Pressure line length l = 20 meters 

• The pressure line material is steel 

• Pressure line inside diameter DN50 

• No attachments such as fittings, elbows, shut-off devices

a) Research different pumps and select the most suitable pump for such application. 

b) Provide the diagrams, specifications and detailed information for the selected pump and justify your selection with appropriate reasoning and comparisons. 

c) Suggest alternative design for the selected pump; also suggest alternative pump/s which could also be used for this application with justifications. 

d) Suggest suitable seals for selected pump, if it is applicable. 

Question 2: (30 marks) 

You are required to prepare a report for your client for the following task: 

Select a suitable turbine which can be used for a hydropower plant at a location where available net head ranges from 1000 to 1,500 m. 

a) Research different turbines and select the most suitable turbine for such application. 

b) Provide the diagrams, specifications and detailed information for the selected turbine. 

c) Justify your selection with appropriate reasoning and comparisons. 

d) Suggest alternative design for the selected turbine; also suggest alternative turbine/s which could also be used for this application with justifications. 

Question 3: (30 marks) 

You are required to prepare a report for your client for the following task: 

You are required to select a compressor for Hydrocarbon Skimming Systems, which requires almost absolute clean air. The following tasks are required: 

a) Research different compressors and select the most suitable compressor for such application. 

b) Provide the diagrams, specifications and detailed information for the selected compressor. 

c) Justify your selection with appropriate reasoning and comparisons. 

d) Suggest alternative compressor type(s) which could also be used for this application, with justifications.

This BME108S: Engineering Assignment has been solved by our Engineering Experts at onlineassignmentbank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.