BUIL1237 - Building Measurement and Estimating - Australian Standard Methods of Measurement - Civil Engineering Assessment Answer

Subject Code: BUIL1237

Civil Engineering Assessment Answer

Task  Task A: Identify the different elements of the substructure using Australian Standard Methods of Measurement (6th Edition) (ASMM 6)

1. You are required to identify the different elements of substructure based on the ASMM6 using the classification table
2. All the identified elements should reflect in the TO list and they should be measured.

Task B:

• Take off quantities for the substructure using the Drawings
• As the first step of taking off, you are required to calculate appropriate girths for taking off.
• Subsequently, you have to take off quantities for each of the items identified in Task A.
• While taking off you have to use ASMM6 concurrently to make sure that you are using the measurement rules appropriately.
• Some of the measurement rules that you must adhere are as follows, o Use the correct unit of measurements based on ASMM6 for each of the items. o Identification of depth categories for trench excavation, girth categories of trees, etc.
• Finally, you have to make sure that the take-off quantities are accurate and sufficient to complete the work.

Task C: Write comprehensive descriptions for each of the items

• While taking off you are required to write comprehensive descriptions for each of the taking of items.
• These descriptions should include the kind and quality of materials together with the quotes given in ASMM6.
• Further, these descriptions should be clear, concise and should follow an appropriate sequence based on ASMM6.

Task D: Use the QS paper appropriately

• You have to make sure that all the taken off quantities and descriptions are entered into the QS paper appropriately.
• The QS paper should be clean and tidy for checking with sufficient space in between two different items.
• As a minimum, you have to make sure that the following are done. o Use of correct column for dimensions and descriptions o Enter the quantities in m for taken off items in the dimension column
• Finally, you are required to square the quantities for each of the items.

Task E: Raise queries if any information is missing on the Drawings or on the Specifications

• While taking off it is very common to have unclear or not specified information on the drawings or specifications. In this case, use the course discussion board for Assignment 1 in Canvas to raise queries.
• You are required to follow the course discussion board although you didn’t ask any query.
• The answers given on the course discussion board might be vital to complete the assignment.
• Although the discussion board is not marked you are required to mention all the information extracted from the course discussion board in the query sheet
• Further, any other assumptions you made while taking off should be entered into the query sheet.
• In the end, you are required to submit a comprehensive query sheet along with the submission.

Task F: Provide a scanned copy of the measurement.

• You are required to get manual measurements if any dimension is not given on the drawing. In this case, you might have to create a scale to get the correct dimension.
• Further, you might be using different color coding to highlight different sections measured.
• All these working drawings should be submitted along as a scanned PDF file.

University: RMIT University

This Engineering Assignment has been solved by our Engineering experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.