BUIL1237: Building Measurement and Estimating - Depth Categories for Trench Excavation - Cost Planning and Estimating Assessment Answer

BUIL1237: Building Measurement and Estimating Assessment Answer

Task: 1 Identify the different elements of the substructure using Australian Standard Methods of Measurement (6th Edition) (ASMM 6)

• You are required to identify the different elements of substructure based on the ASMM6 using the classification table
• All the identified elements should reflect in the TO list and then should be measured.

Note: Please note that the scope for this assignment excludes the ground floor slab and the reinforcement in the strip foundation. Task B: Take off quantities for the substructure using the Drawings

• As the first step of taking off you are required to calculate appropriate girths for taking off.
• Subsequently, you have to take off quantities for each of the items identified in Task A.
• While taking off you have to use ASMM6 concurrently to make sure that you are using the measurement rules appropriately.
• Some of the measurement rules that you must adhere are as follows,
• Use correct unit of measurements based on ASMM6 for each of the items.
• Identification of depth categories for trench excavation, girth categories of trees etc.
• Finally, you have to make sure that the taken-off quantities are accurate and sufficient to complete the work.

Task C: Write comprehensive descriptions for each of the items

• While taking off you are required to write comprehensive descriptions for each of the taking of items.
• These descriptions should include the kind and quality of materials together with the quotes given in ASMM6.
• Further, these descriptions should be clear, concise and should follow an appropriate sequence based on ASMM6.

Task D: Use the QS paper appropriately

• You have to make sure that all the taken off quantities and descriptions are entered into the QS paper appropriately.
• The QS paper should be clean and tidy for checking with sufficient space in between two different items.
• As a minimum you have to make sure that the following are done.
• Use of correct column for dimensions and descriptions
• Enter the quantities in m for taken off items in the dimension column
• Finally, you are required to square the quantities for each of the items.

Task E: Raise queries if any information is missing on the Drawings or on the Specifications

• While taking off it is very common to have unclear or not specified information on the drawings or specifications. In this case use the course discussion board for Assignment 1 in Canvas to raise queries.
• You are required to follow the course discussion board although you didn’t ask any query.
• The answers given on the course discussion board might be vital to complete the assignment.
• Although the discussion board is not marked you are required to mention all the information extracted from the course discussion board in the query sheet
• Further, any other assumptions you made while taking off should be entered into the query sheet.
• At the end you are required to submit a comprehensive query sheet along with the submission.

Task F: Provide a scanned copy of the measurements

• You are required to get manual measurements if any dimension is not given on the drawing. In this case you might have to create a scale to get the correct dimension.
• Further, you might be using different colour coding to highlight different sections measured.
• All these working drawings should be submitted along as a scanned PDF file.

This BUIL1237: Building Measurement and Estimating Assignment  has been solved by our Cost Planning and Estimating experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.