CCNA - Design and Install Network - Design a Network Subnetting Scheme - IT Assignment Help

Assignment Task:

Task:

About this assessment:
These assessment tasks provide an opportunity to demonstrate the competencies required to evaluate a customer’s IT networking requirements and to design and build a LAN and WAN that meets the customer’s requirements.
In this scenario, you are a network administrator for a small subdivision within a larger company (Western Mining). They have been provided with a single network address 172.16.0.0/16 from their ISP.

Designing and Implementing a Subnetted IPv4 Addressing Scheme
Part 1: Design a Network Subnetting Scheme
Part 2: Configure the Devices
Part 1:
Download Final Assessment ADDRESSING TABLE.docx file and rename it to studentNumber_lastName_name_FAT.docx

In this Part of assessment, starting from a single network address 172.16.0.0/16, you will subnet the network into multiple subnets. The subnet scheme should be based on the number of host computers and Servers required in each subnet. After you have created a subnetting scheme and completed the network diagram by filling in the host and interface IP addresses in the table provided in the “Final Assessment ADDRESSING TABLE.docx “, you will configure the hosts PCs, router interfaces, Switches and Servers.

Required Resources
 Latest Version of Packet Tracer
  Addressing Table Document File
 PacketTracerAccessmentActivity.pka

Step 1:
Create a subnetting scheme that meets the required number of subnets and required number of host addresses.
1. You have been provided with 172.16.0.0/16 network address space to use for Brisbane building
2. A WAN link between Sydney and Brisbane. You use 192.168.1.0/30 for this Network.
3. Sydney Office needs to use 172.20.0.0/16 and they have only one network.
VLSM must be used in this scenario.
Step 2:
Complete the diagram showing where the host IP addresses will be applied. Fill in the IP addresses and subnets masks in the “Final Assessment Addressing Table Document” file.
One cisco 2811 router must be used for Sydney and one for Brisbane,

This IT  Assignment has been solved by our IT Experts at onlineassignmentbank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment Experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.