CEA2417 - Construction and Estimating Assignment - TAFE Queensland

Assignment Task

Preliminary And General

• All Quantities Have Been Measured In Accordance With As1181
• Australian Standard For Measurement Of Civil Engineering Works And Associated Building Works
• All Site Works In Connection With This Project Are To Be Completed Under a Separate Contract
• All Estimates Are Based On Engineering And Architectural Drawings

Excavator

• Grub Up And Cart Away
• Bulk Excavation And Cart-Away
• Deco (Packing Sand) 100 Mm
• Footings And Ground Beams N. E. I M Deep And Dump On Site

Concretor

• Blinding 20 Mpa 100 Mm
• Footings/Ground Beams 32 Mpa
• Columns 32 Mpa
• Surface Bed 40 Mpa
• Elevated Beams And Slabs 32 Mpa
• Stairs And Landings 32 Mpa
• Sand/Cement Screed To Falls As Specified 70 Mm Average
• Machine Trowel Slabs
• Water-Proofing Screed
• Visqueen" Underlay
• Abelflex Jointing Strip 200 X 10

Reinforcing Steel

• Footing
• Columns
• Elevated Beams
• Ditto Slabs
• Stairs And Landings
• Surface Bed (S.L. 92/M2)

Cladding

• Kingspan" Insulated Sheeting Fixed As Per Manufacturers Instructions
• Ditto Wall Sheeting
• Colorbond Ridge Capping
• Ditto Barge Capping
• Ditto Flashing
• Ditto Parapet Capping
• Ditto Quad Gutter 150 Mm
• Ditto Downpipes 150 Mm X 100 Mm
• Hardy' Cladding As Specified

Provisional Sums

• Goods Lift, Electric Hydraulic Supplied And Installed
• Plumbing And Drainage
• Electrical Installation
• Air Conditioning To Office Block
• Office, Change Rooms, Toilet And Shower Partitions, Tiling, Suspended Ceilings, Floor Finishes & Shopfitting Complete
• Siteworks - Retaining Walls, Security Fencing And Gates, Concrete Paving,
• Landscaping And Signage

This CEA2417 – Engineering has been solved by our PHD Experts at My Uni Paper.