CENG0017 - Process Dynamics and Control - Dynamic Model - Chemical Engineering Assessment Answer

Assessment Details:

Questions:

1. Develop a dynamic mathematical model for the tray, neglecting the energy balance and including only the material balance of the liquid phase. Indicate the time-dependent terms and the nonlinear terms in the balance model. 

2. Linearise the model around the steady-state operation and write the equations in terms of deviation variables.

3. Determine the transfer functions linking the liquid level h(t) and the outlet liquid flowrate q(t) to the inlet flow rate qi(t). 

4. What is the order expressed by each transfer function? Calculate the values of the relevant transfer function coefficients indicating their dimensions and sketch the block diagram for the system, including all the relevant transfer functions for the system.

5. Now we want to extend the study to the rectifying section of a distillation column with N trays operating at total reflux (Figure 1b). What will be the transfer function linking the inlet flow rate to the first tray (tray 1) to the liquid level in the last tray (tray N)? Determine the overall order of the transfer function. We assume that all the trays have the same geometry and that the same functional relationships (1) can be used to describe the outlet volumetric flowrate in each tray. 

6. Provide a set of suitable initial conditions (i.e. conditions of the state variables for t = 0) for solving the single tray model. Justify your choice of the appropriate numerical values.

7. Simulate the single tray system using gPROMS:

• Compare and plot the response of the linear model and the response of the nonlinear model when a 30% step and a 150% step increase on the nominal inlet flowrate qi(t) is applied. In the graphs include the responses h(t) and q(t) and the step variation on the forcing function qi(t). 
• Is the response to the perturbation stable? Is the linearised model adequate to represent the response of the system? Motivate the answers. 

The above Chemical Engineering Assessment has been solved by our Chemical Engineering Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.