CFS2102 : Configuring and Building Computer Networks - IT Assignment Help

Assignment Task:

Task:

Task 1: Create an IP Addressing Scheme for the provided network topology (20 Marks)
Create an IP addressing scheme for each of the following LANs. Each LAN should have capacity for the number of host addresses shown in the table below: LAN Devic
e
LAN Interface Host Addresses Required

1 R1 Gig0/0 25
2 R1 Gig0/1 200
3 R2 Gig0/0 200
4 R3 Gig0/0 200

LAN Network Address First IP Address Last IP Address Broadcast Address
1
2
3
4

Device Interface Network Address IP Address Subnet Mask
R1 Gig0/0
R1 Gig0/1
R2 Gig0/0
R3 Gig0/0

Task 2: Configure the routers using OSPF (18 marks)
2a: Work out suitable network schemes for all routers (7 marks) Device Interface Network Address Wildcard Mask

R1

Gig0/0
Gig0/1
s0/3/0

R2

Gig0/0
s0/3/0

R3

Gig0/0
s0/3/0

2b: Configure OPSF on the routers (4 Marks)
What commands have you used to configure OSPF? Please document the commands you use for configuring router R1.

2c: Verify that OSPF is working correctly (3 Marks)
Please show neighbours, OSPF databases, and routing table (Please screenshot the output of one of the three routers).
What commands have you used to do this?

2d: Configure OSPF priorities (2 Marks)
Change the priorities to make R1 the DR, R2 the BDR and R3 the DROTHER. What commands have you used to do this? Please provide screenshots for demonstration of the result.

2e: Configure OSPF cost (2 Marks)
(1): Set the cost on the R1 WAN link to a value of 20 and record the commands you use for this.
(2): Set the cost of the R2 WAN link to a value of 100 and record the commands you use for this.
(3): Verify the cost settings and screenshot the outputs.

This CFS2102  :IT   Assignment has been solved by our IT Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.