CIVE1208-Structural Design of a Manufacturing Plant - Engineering Assignment Help

Assignment Task

Task

This project will introduce you to the fundamentals of design of reinforced concrete structural members. As part of a team you have been engaged by an architect to design a single storey reinforced concrete manufacturing plant. Your design team will be in groups of four.

The design data of the building are as follows:

Design Data:

Actions (Load):                  

 Ceiling and services 0.3 kPa
 Additional dead load 0.5 kPa
 Imposed Load 1.0 kPa
 Floor finishes 0.3 kPa

• Characteristic concrete strength f’c = 40MPa.
• Longitudinal steel: Cold worked high yield reinforcement.
• Shear reinforcement: Hot rolled mild steel reinforcement.
• Yield Strength, fsy = 500MPa.
• Maximum bar length is 6 m with bar diameter fulfils the following criteria:

- 10mm < bar>

• Slab thickness = 180 mm.
• Assume 125 mm brick wall.
• Beam width = 300 mm. The beam depth is 600mm.
• Column section to be 400 x 400 mm square.
• Foundations 1.0 m below ground level. Permissible soil-bearing pressure = 150 Kpa.

Using the requirements of relevant part of AS 3600 you are required to carry out the following tasks:

• Estimate primary loads (DL and LL) on the one-way slabs, beam element, slab element and columns and determine load combinations for strength and serviceability.
• Summarise design actions (M*,V*,N*) for critical load combinations.
• Prepare final sketch drawings of selected elements of the structure including reinforcement detailing.
• Design the Beam 1 for bending, shear and deflection.
• Design the slab.
• Design the column C1.
• Design the critical footing.

This CIVE1208-Engineering Assignment has been solved by our Engineering Expert at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing Style. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.