COMP551: Programming the PIC-P40 Proto-Board - IT Assignment Help

Assignment Task:

Task:

1. Write a program to flash the PIC-P40 on-board LED on for 1 second and off for ½ second (see attached schematics for details). Use Timer0 to create the 1 second delay and Timer1 to create the ½ second delay. Be sure to use the MPLAB simulator to verify the proper operation of the program. Once you have fully debugged the program, write the code to the PIC-P40 and demonstrate its operation to the instructor by uploading a video to D2L.

2. Using a protoboard, connect an LED to pin RB0 on your PIC-P40 board. Be sure to use a current limiting resistor (470 Ω) in series with the LED (see attached PIC-P40 schematic, for proper wiring of the LED).

Write a program so that when the on-board button (see attached schematics for details) is pressed and held, the on-board LED (RA0) flashes on and off for ½ second, 5 times, followed by a 1 second off interval, then repeats the cycle. When the on-board button is released, the LED connected to RB0 flashes on and off for 1 second, 3 times, followed by a ½ second off interval, then repeats the cycle. Both LED’s should be off on program start-up.

Use the Timer modules (Timer0 and/or Timer 1) to create the delays. Be sure to use the MPLAB simulator to verify the proper operation of the program. Once you have fully debugged the program, write the code to the PIC-P40 and demonstrate its operation to the instructor by uploading a video to D2L.

This IT/Computer Science Assignment has been solved by our IT/Computer Science Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.