Configuring IP and Subnetting for VLAN Network Configuration and Router Setup

Download Solution Order New Solution

Assignment Task

Topic

  • PT Activity: 19:02:08
  • Use the 2nd subnet for network A
  • R1 must have the 1st IP address in the subnet on the network A side
  • Use the 4th subnet to create 4 smaller subnets for 14 hosts each
  • Use the first of the smaller subnets for network
  • RI must have the 1st IP address in the subnet on the network B side
  • PC1 and PC3 must have the 2nd IP address in the subnet
  • PC2 must have the 3rd IP address in the subnet
  • TFTP Server must have the 2nd IP address in the subnet
  • S1 and S2 Vlanl must have the last IP address in the subnet
  • S3, S4, Marketing PC1 and 2 and Sales PC 1-3 use the IP address table provided
  • Configure Vlan 10 Sales
  • Configure Vlan 20 Marketing
  • Ensure that only Sales PCs can ping other sales PCs
  • Ensure that only Marketing PCs can ping other Marketing PCs Configure Line Con 0 passwords on all switches with password cisco
  • Configure secret level 15 enable password with c1Sc0 on all switches
  • All routers and switches need to be renamed as per the naming convention
  • All routers and switches must have the motd banner Authorized Access Only!
  • Configure a username admin for R1 with a password cisco12345
  • Configure secret level 15 enable password with c1Sc012345 on the router
  • Rl minimum secret password length must be 10 characters
  • Configure the R1 domain as CSEC1004.ac.uk
  • Backup the R1 startup configuration to the TFTP server me Elapsed: 19:02:08

Divide the 192.168.4.0/24 network into 4 equal sized subnets

  • You will need to configure S1 from PC1
  • You will need to configure $2 from PC3
  • You will need to configure R1 from PC2
  • Use the 2nd subnet for network A
  • R1 must have the 1st IP address in the subnet on the network A side
  • Use the 4th subnet to create 4 smaller subnets for 14 hosts each
  • Use the first of the smaller subnets for network
  • R1 must have the 1st IP address in the subnet on the network B side
  • PC1 and PC3 must have the 2nd IP address in the subnet
  • PC2 must have the 3rd IP address in the subnet
  • TFTP Server must have the 2nd IP address in the subnet

This IT Computer Science has been solved by our PhD Experts at My Uni Paper.

Get It Done! Today

Country
Applicable Time Zone is AEST [Sydney, NSW] (GMT+11)
+

Every Assignment. Every Solution. Instantly. Deadline Ahead? Grab Your Sample Now.