Construction Technology - Management Assignment Help

Assignment Task

MAJOR ASSIGNMENT : APPLIED OR RESEARCH-BASED INVESTIGATION OF ONE BUILDING SERVICE

Background

The unit we are studying this semester covers the variety of building services incorporated in major construction projects, including electrical; mechanical; hydraulic; fire systems; transportation; communication and security. It approaches the subject matter in terms of what might be expected of a manager in the design and construction process. Coordination and integration of these services is vital, both in terms of “buildability” and “life-cycle efficiency” as the project is prepared for handover, then transposes to on-going user satisfaction deliverables.

With Covid19 considerations dictating on-line learning this semester, our major assignment will require independent investigation of one of the services we will be studying. Many of you are employed in the industry and have access to either a currently under-construction project, or to a project in the design stage. Your task will be to investigate and report on characteristics of the service as it applies to that project. The remainder will access recent resources such as journal articles and/or manufacturers data which will detail current and future trends in the provision of that service to new projects or to the refurbishment of existing buildings. Your task will be to report on that service and how it is changing in terms of deliverables.

Method

As indicated in the background statement, the requirements for this assignment depends on either your physical access to an actual project in the design stage or under construction, or those without such access and reliant on published research and/or manufacturers recommendations. Each will require a differing base requirement, but both will concentrate on ONE service only

In this unit you will quickly grasp the concept that we classify building services into groupings and subcategorise those groupings into specialities. An example tabulated listing follows. Please note that it is for demonstration purposes and is in no way exhaustive. Nevertheless, it will provide a starting point as you commence this assignment and select your report topic. With justification, you can study a topic outside these classifications but be sure to gain approval before you delve too deeply into your assignment.

1. Those with access to an actual project

The initial decision will be the selection of the service to be studied. Make sure you have approval from those managing the project to undertake the study. It will necessitate access to specification(s), plans, scheduling details (lead times for ordering and sequence on site), on-site photos (if installed and potentially during installation) and if possible, commentary from the Service Engineer and the Site Manager and installation team members.

As an example, if you were to select the electrical main switchboard on your project for your study, it would be expected that the specification would be detailed (including the manufacturer); the location on site would be discussed (including the physical area in m2 of the room in which it was located); how long the lead-time for manufacture and delivery and any particular idiosyncrasies regarding delivery and placement (such as specialist craning etc); photographic and diagrammatic references included as appropriate. Commentary from personnel involved will be expected. In so doing, aspects of the installation that might be deemed acceptable (or possibly unacceptable) would be stated and recommendations for future installations established. In this regard, whilst the present design and arrangements might suffice, it may be recommended that greater space be provided in the room; or better egress provided; or differing arrangement of cable delivery into or out of the room etc. etc. be established in your report.

2. Those using reference to research and/or manufacturers’ literature and recommendations

You will start by undertaking a broad investigation into new or revised services systems that are under investigation or newly introduced into building and construction. If we look at (say) electrical services as an example, it might be that you would be interested in alternative ways to provide base-load power to a project. We presently rely on coal fire power in NSW which is distributed from source of generation in The Hunter Valley, via high voltage cabling and transformed to lower voltage for our buildings and facilities. You may be inclined to look at the alternatives such as the various generating systems that are property or estate based. Cogeneration and trigeneration plants come to mind and it would be appropriate for a study on the offerings available at present and the future technologies that are being investigated and trialled. It would be expected that the specifics of the system would be detailed (including the manufacturer); how it would be located (or co-located) on site (including the physical area in m2 of the location); how long the lead-time for manufacture and delivery and any particular idiosyncrasies regarding delivery and placement (such as specialist craning etc). Your photographic and diagrammatic references would come from the literature or the manufacturer including appropriate referencing. Commentary would hopefully include recommendations as to the benefits of the system and this would include immediate and the longerterm (life-cycle) benefits.

Learning Outcomes Addressed
• Interpret building regulations
• Regulatory knowledge
• Communicate professionally within regulatory frameworks
• Recognise environmental connections with built form
In your Zoom sessions in the initial weeks of this unit, there will be ample time to discuss your options so that you optimise your method of study and topic selection.

This Management Assignment has been solved by our Management Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.