CPC40110: Certificate IV In Building And Construction - Six Apartments, Fire Protection Measures Case Study - Architecture Assignment Help

Assignment Task

Assessment Task 2: Case Studies

Part A – Change of plan 

Scenario 

You are working on a project for a local developer to build six apartments, with combinations of one  and two bedrooms built over three levels: ground, first and second with a loft/mezzanine level design.  This building form is contemporary, liked by town planners but maybe a bit ahead of its time.  

After receiving town planning approval, the developer starts marketing the properties and manages  to sell one off-the-plan just as construction commences. However, the purchaser insists as a condition  of the sale that the construction of the stairs leading to the loft/mezzanine be changed from all timber  to iron treads with wire balustrades.  

Based on the scenario, set out the relevant effects that would need to be considered if the  construction of this project were to change according to the purchaser’s wishes.  

a) Using the table below, list the relevant parts of the BCA that would change and any (AS or  AS/NZS) Standards referred to if they are relevant to your class of construction and BCA  construction type.  

• Relevant BCA section(s) or Australian Standard(s)
• Brief description, name of standard(s) or  heading of section(s) in BCA.

b) List one (1) “deemed to satisfy” provision affected.  

c) Detail any flow on implications that might occur when the change is made (for example,  consider other people working on the project and how the change might affect them). 

Part B – Fire protection 

Scenario 

You are in charge of assessing the fire protection measures for a new property at 1 Example Street,  Tasmania, that is being built in an area at high risk of bushfire attack.  

• Answer the questions below to determine the fire protection requirements for the property and  create a checklist.  

• Then, using the plans provided, complete the checklist to assess whether the proposed property  complies with BCA requirements for passive and active fire protection.  

a) What is the BCA Class, Type and number of storeys of the project, or all classes if multiple  classes?  

b) What is the total floor area of the building, including the patio? Use the space below to show  your calculation.  

c) List three types of plans are you using to assess the specifications of the property? 

d) Summarise in your own words the Objective, Functional Statement and Performance  requirements for Firefighting equipment:  

• Objective 
• Functional statement reference 
• Requirements.

e) List at least two types of active equipment and systems that might be required for this building. 

Assessment Task 2: Practical activity 

Part A 

Scenario 

Your client owns a block of land, approximately 312m2, in Fitzroy, Melbourne. They are looking to add  value to their property portfolio and prepare for retirement by building on this land.  

After some research and several feasibility studies, discussions with town planners, architects and the  council (City of Yarra), the client decides on the following building form for the site:  

Four, two-bedroom, two storey town houses designed to blend in with the surrounding terrace houses  in adjoining streets. This type of building has a high chance of being granted a planning permit by  council. 

Based on the scenario and associated drawings you have been provided with, you are required to set  out the relevant Deemed-to-Satisfy provisions of the BCA associated with the project. 

Break into a group of around five students for this task. Discuss the questions for the first part of this  task as a group, making sure you write your answers down individually in your Assessment Kit.  

For questions (g) to (j) work individually on the part of the project you have been allocated in  consultation with your group.  

Answer the questions and follow the instructions below about the case study to complete this task. 

a) What BCA Class of building is this?  

b) What is the floor area of each building?  

• Building
• Building

 c) What BCA construction type is this building?  

d) Can this project be classified as a “low rise building project” (as defined in this unit)? 

e) Identify the stages of the construction process from site preparation right through to fit out.  Write them in the space below.  

This CPC40110 - Architecture Assignment has been solved by our Architecture Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment Experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.