CPCCBC5009A - Identify Services Layout and Connection Methods to Medium Rise Construction Projects - Case Study - Engineering Assignment Help

Assignment Task

Background
To support the role of the builder in being able to produce construction industry documentation, students have access to a professional intranet that provides a simulated building company, RB Holdings. RB Holdings functions as a workplace environment where project-based assessments can be undertaken using industry standard documentation, plans, activities, responsibilities and procedures. The RB Holdings business structure allows simulation of work environments such as, but not limited to, design offices, site offices and construction sites.  RB Holdings provides students with relevant documentation that is to industry standard that allows students to experience a professional simulation of a construction office environment. RB Holdings is a fictitious organisation that has been created purely for educational purposes. RB Holdings materials are accessed via a secure website that is copyright of © TAFE NSW.

Part 1: Practical Tasks
Scenario
Working as a construction professional will be demonstrating your capabilities to successfully identify services requirements, layouts and connections for a multi storey building projects. Your role requires you to identify and evaluate services layouts to comply with building codes, regulations and standards.
You will carry out an analysis of project plans and specifications, and apply design concepts by producing sketch overlays, schematics and reports to be appraised by managers and specialist consultants, in order to assist with the coordination and management of the projects.

Task 1: Produce sketch layouts for services
Task 1.1
Referring to the TopMast Tower - Architecturals-V0520 (Topic_Building_SR39) plans and specifications, and using notated diagrams, overlays and written descriptions, document the possible solutions for the supply of potable water to the building considering the following requirements:
A range of pumping configurations that could be used.
Header tank storage arrangements noting the limitations of their use.
Pressure control considering the buildings height.
References to the Codes and standards.

Task 1.2
Referring to the TopMast Tower - Architecturals-V0520 (Topic_Building_SR39) plans and specifications, provide overlay sketches of the sanitary drainage layout for the building on selected drawings as detailed below:
A vertical overlay to drawings A040 and A041
A Plan overlay to drawings A020 and A034
The sketches are to include the following elements:
The use of standard drawing conventions and symbols relevant to the service installation.
Position and connections to stacks
Include a table describing the number and type of fixtures and fixture unit loading of the drain and correct sizing of the upstream vent.
Determine and draw an appropriate stack type and venting arrangements assessed with reference to the number of fixtures in the dwelling.
Method of discharge from basement to the authority’s mains sewer assuming main line is higher than fixture.
Separate diagram showing the details for a suitable soffit connection to mains drainage line.

Task 1.3
Referring to the TopMast Tower - Architecturals-V0520 (Topic_Building_SR39) plans and specifications, identify possible prohibited discharges from the commercial kitchen, medical, dental and pathology suites and fully describe a method to collect and treat these discharges including how these may be monitored. Provide references to applicable regulatory requirements, legislation and the relevant Codes and Standards.

Task 1.4
Referring to the TopMast Tower - Architecturals-V0520 (Topic_Building_SR39) plans and specifications, sketch an overlay of a proposed layout for suitable mechanical ventilation and air distribution methods servicing each of the following areas:
Basement carpark
Ground level restaurant
The sketch will include the following elements:
Notations on the sketch referencing the Codes and Standards.
The use of standard drawing conventions and symbols relevant to the service installation.
Show all duct routing, and ventilation methods appropriate to the design of the building including the use of supply air including for AC units, and exhaust air as required.
Incorporate complimentary air distribution methods.
Plant and equipment placements.

This CPCCBC5009A - Engineering Assignment has been solved by our Engineering experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.
Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.