Designing a 9 Pieces Screwdriver - Engineering Assignment Help

Assignment Task:

Introduction:  
In this mid-term project, I will be designing a 9 pieces screwdriver. Everything that was learned in this class helped me to accomplish this project. First, I started with taking the measurements of all the pieces. I designed each piece separately and then assembled all of them at the end. Extrusion features and loft features were commonly used in accomplishing this project. Below is a detailed explanation of how each piece was designed.  
 
Screwdriver handle 
? The screwdriver handle is accomplished using a loft feature. 
? 6 planes were added in addition to the front plane. 
? Circles and polygons were sketched on the planes. 
? Using Spline feature, the main shape for the screwdriver was drawn.
? The planes are then lofted together 

? Extrude feature is then used to connect plane 1 with the front plane. 
? Using Extrude cut, a hole was created on the top.
? Another hole was extruded on the bottom. 

Rubber part  
? A plane was added in reference to plane 1. 
? A circle was sketched on each plane (one circle larger than the other). 
? Loft feature was used to connect both circles 
? Extrude cut feature was used to cut through the object. 
? Another plane was created and was drawn on to create this circular looking shape and then extruded it.
? The circular and linear pattern was used to duplicate it all around the object.  
? A rectangle was drawn and extruded inside the rubber object. 
? Using a circular pattern it was duplicated.  
? Finally, some filleting was done. 

Handle cap  
? A circle was sketched and then extruded it. 
? A smaller circle was sketched on top of the 1st circle and then extruded. 
? Fillet feature was used on the top surface  
? A hole was then extruded cut on the 2nd circle  

Metal piece  
? A circle was sketched and then extruded. 
? A polygon was then sketched on top on the circle and extruded cut. 
? The fillet was applied to the top surface.  

Screws holder 
? A polygon was sketched and then extruded. 
? It was then filleted.  
? Extrude cut feature was then used to cut a hole through it. 
? A circle was sketched and then extruded cut. 

Conclusion: 
In conclusion, this project was accomplished successfully. All the parts were assembled together. Everything learned in this class helped me to achieve the final design.

This Engineering Assignment has been solved by our Engineering Experts at onlineassignmentbank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.