Develop an ISS for the RV64I Subset of the RISC Instruction Set - IT Computer Science Assignment Help

Assignment Task

Task 

The task for this assignment is to develop an instruction set simulator (ISS) for the RV64I subset of the RISC-V instruction set.

Your task for this assignment is to develop an instruction set simulator (ISS) for the RV64I subset of the RISC-V instruction set. An instruction set simulator is a program used by computer architects to simulate execution of a computer’s instructions. It contains representations of the computer’s memory and the internal registers of the CPU. It responds to commands that specify initialization and inspection of the memories and registers, and control execution of instructions.
The RISC-V instruction set is described in The RISC-V Instruction Set Manual, Volume I: Unprivileged ISA, available on the course web site. The RV64I subset is described in Chapter 5 of the Instruction Set Manual, building on the RV32I subset described in Chapter 2. The instruction encoding is summarized in Chapter 24. For this assignment, you should implement just the RV64I base integer instruction set, with the following exceptions:

• FENCE: This instruction should be decoded as a legal instruction, but perform no operation.
• ECALL, EBREAK: These instructions should be decoded as legal instructions, but a message should be displayed indicating they are unimplemented.

For load and store instructions, you can assume that the effective address is properly aligned. Do not implement misaligned loads or stores. For any fetched instruction word that does not represent an RV64I instruction, a message should be displayed indicating the instruction is illegal. In Stage 2, you will implement exception handling, which will be used for illegal instructions.

We have provided a skeleton program on the course web site for you to use as a starting point. The program is written in C++, and islocated in the Assignment file folder (also linked in the Assignment module). You can download either rv64sim.zip or rv64sim.tgz; the content is the same in each. The skeleton program implements processing of command-line options and input commands. Your task isto implement classesto model the processor and memory. Header files are provided showing the member functions required. You can add additional classes if you need to. the only command-line option you need to implement at this stage is the -v option to enable verbose output. If the - v option is specified on the command line, your program can display debugging information. If the option is omitted, your program should display only the output required for each command. Your program must format that output exactly as specified below, since the assessment process will compare you output with expected output.

Each command may be followed by a comment, starting with the ‘#’ character and extending to the end of the line. blank lines are permitted, as are lines containing only a comment. the initial value of all processor general purpose registers should be 0, and the initial value of the PC should also be 0. The memory should appear to have all locations initialized to 0. Your program should count the number of instructions executed. This will be reported on completion of execution.You can test your ISS by using the “m” command to set memory locations to the encoded value of RISC-V instructions, using the “pc” command to set the PC to the start of the code, then using the “.” command to execute the code. Alternatively, you can use the RISC-V GNU Compiler Toolchain (C compiler, assembler, linker, binutils; available at  to generate hex files to load into memory. We will use both of these processes when we assess your ISS.

Performance of an ISS program is important. Computer architects typically use them to develop code for embedded system, so they must be able to execute 100s of thousands of instructions per second. You should design your ISS with performance in mind. The skeleton program provided uses the native integer data types uint32_t and uint64_t to represent instructions and data, rather than using a dynamically allocated class-typed object or string. When you implement the memory, you should not attempt to represent it using a large array of words. Since addresses are 64 bits, that would imply an array of 264 bytes. Instead, consider a representation that allocates blocks of memory on demand (that is, on the first read or write to an address within a block).

Please keep an eye on the Questions and Answers forum on the course web site. There will no doubt be questions of clarification of requirements arising that we will answer there. We will also announce incremental releases of a test suite that you should use to test your program.
You must develop your program and check it into a subdirectory named 20xx/s1/ca/rv64sim in your SVN repository
(xx represents the last 2 digits of the year). We will provide a web submission script that will check out this subdirectory, make your ISS, and run it with several test cases. Compliance with this development process will count toward the assessment of the assignment. The script will compare your output with our expected output using the “diff -iw” command (differences ignoring case and white-space).

Your work for Stage 1 will be assessed in the web submission system based on the following criteria, with points awarded out of 1500:
• Program builds and runs using web submission script. 
• Correct execution of instruction, based on the number of test cases that pass.
• Program efficiency, based on run time not exceeding a limit.

The points for this assignment will comprise 15% of your final assessment for the course. For the submission deadline, please refer to the course page on MyUni.

Postgraduate requirements
If you are enrolled in the postgraduate course (COMP SCI 7026), you should implement the following additional requirements:
During simulated execution, you should count the number of simulated clock cycles, in addition to the number of instructions executed. You should use the following cycle counts for various instruction types:

•  Conditional branch instruction: 2 cycles if the branch is taken, or 1 cycle if the branch is not taken.
•  Unconditional branch instruction: 2 cycles.
•  Load instruction: 3 cycles.
•  Store instruction: 2 cycles.
•  All other instructions: 1 cycle.

On completion of a simulation, if the -c option is specified on the command line, your program will report the total number of simulated clock cycles taken.

This IT Computer Science Assignment has been solved by our IT Computer Science Expert at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing Style. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. 

You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.