Develop IPv4 Addressing Scheme - Troubleshoot WAN Links - IP Server - IT Assessment Answer

Develop IPv4 Addressing Scheme - IP Server - IT Assessment Answer

Assessment Task:

Task

Task 1: Download the Assessment files

In this Skills Assessment (SA) you will configure the devices in a small network. You must configure a router, switch and PCs to support both IPv4 and IPv6 connectivity. You will configure security, including SSH, on the router. You will test and document the network using common CLI commands. Finally, you will save the router configuration to a TFTP server.

1.    After you have completed the Final Theory Exam, it is time to undertake the Final Practical Skills Exam assessment so we may gauge your understanding on the practical aspects for the learning you have completed. 

Download the two files: 
•    Packet Tracer File 
•    Switching and Routing 5-3 document file

2.    Following the instructions within the document Switching and Routing 5-3 complete tasks on the Packet Tracer Assessment file. 

3.    Where applicable, ensure that you have answered the questions with the Switching and Routing 5-3 document as well as it has areas for you to write your answers from this exam. 

4.    Once you have completed all the tasks for the assessment on both the Packet Tracer Assessment file as well as the Switching and Routing 5-3 file, proceed to submit both files via the OLS as per the instructions specified in the sections below. 

5.    Once you have completed Final Exams and record your results accordingly in the table below and a teacher will check your results online in the Cisco Network Academy website for these exams.

    Scenario
In this Skills Assessment (SA) you will configure the devices in a small network. You must configure a router, switch and PCs to support both IPv4 and IPv6 connectivity. You will configure security, including SSH, on the router. You will test and document the network using common CLI commands. Finally, you will save the router configuration to a TFTP server.   

Packet Tracer Resources
•    1 Router 
•    1 Switch 
•    2 PCs 
•    Console cable to configure the Cisco IOS devices via the console ports
•    Ethernet cables as shown in the topology

Task 2: Develop the IPv4 Addressing Scheme

Given an IP address and mask of 192.168.25.0/24 (address/mask), design an IP addressing scheme that satisfies the following requirements. Network address/mask and the number of hosts for Subnets A and B will be provided by your instructor.

Task 3: Initialize and Reload Devices

Step 1:    Enter the appropriate CLI command needed to initialize and reload router and switch

Task 4: Configure Device IPv4 and Security Settings

Step 2:    Configure host computers.
After configuring each host computer, record the host network settings with the ipconfig /all command.

Step 3:    Configure R1.

Step 4:    Configure S1.

Task 5: Test and Verify IPv4 End-to-End Connectivity

Step 5:    Verify network connectivity.
Use the ping command to test connectivity between all network devices.

Task 6: Configure IPv6 Addressing on R1

Given an IPv6 network address of 2001:DB8:ACAD::/48, configure IPv6 addresses for the Gigabit interfaces on R1. Use FE80::1 as the link-local address on both interfaces.

Step 6:    Configure R1.

Task 7: Test and Verify IPv6 End-to-End Connectivity

Step 7:    Obtain the IPv6 address assigned to host PCs.

Step 8:    Use the ping command to verify network connectivity.
IPv6 network connectivity can be verified with the ping command. Use the following table to methodically verify connectivity with each network device. Take corrective action to establish connectivity if a test fails

Task 8: Use the IOS CLI to Gather Device Information

Step 9:    Issue the appropriate command 

Step 10:    Enter the appropriate CLI command needed to display the following on R1

Task 9: Enter the appropriate CLI command needed to save the R1 Configuration to a TFTP Server.

This IT Assessment has been solved by our IT Assessment Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.