Diploma of Building and Construction Case Study - Engineering Assignment Help

Assignment Task

Trainer Name Student Statement
Plagiarism is a form of cheating. It is taking and using someone else’s thoughts or writings and representing them as your own. Plagiarism is a serious act and may result in a participant’s exclusion from a Unit of Competency or a course. This in turn may require for students to pay to re-complete the module or course at a later date.
The following list outlines some of the activities for which a participant can be accused of plagiarism:
Presenting any work by another individual as one’s own unintentionally
Handing in assessments markedly similar to or copied from another student
Presenting the work of another individual or group as their own work.
Handing up assessments without the adequate acknowledgement of sources used, including assessments taken totally or in part from the internet.
Many of the workbook activities are ‘open book’ yet should still be conducted under test conditions without consultation with other students. If you are unsure of any assessment requirements you should check with your Trainer / 
What do I need to do?
You have arrived on site at project that uses the same design as project no. 43324 but is using a timber framed floor. The floor grid has been constructed as shown in the diagram below.
For this task, you need to refer to the Assessment Task Worksheets - Low Rise Structures  INCLUDEPICTURE "https://buildersacademy.instructure.com/images/svg-icons/svg_icon_download.svg" \* MERGEFORMATINET  Download Assessment Task Worksheets - Low Rise Structures and refer to the Timber Floor Systems Worksheet (Page 2 of the Worksheets)
The carpenter has advised you the floor system is ready for sheeting. The floor system design data from AS1684-2010 is listed below:
Bearer spans below are for a Roof Load width of 4800mm.
Bearer 2x90x45 MGP12 Spanning 1200 mm floor load only.
Bearer 2x90x45 MGP12 Max Span 1200 mm at 450mm cts for load Bearing Walls and a floor load width of 1200mm.
Floor joists 90x45 MGP12 Max Span 2000 mm for floor loads only.
What do I need to do?
You are now required to review the drawings and do the following:
Determine whether this floor system set-out is structurally compliant with AS1684-2010. Identify any areas where it does not meet compliance and explain why
Provide a sketch with proposed changes in line with your findings
Provide an alternative bearer and joist system from engineered timber products that would meet the requirements of this layout and improve the sustainability of the construction
In providing a platform floor sheeting system for this frame, determine and describe:
what sheeting would be used and reasons for the selection
method of set-out and laying of the floor system
How will I be assessed for this task?
For this task you are required to submit the following:
Completed sketch with proposed changes to ensure compliance with AS1684-2010
Provide a fact sheet on an alternative bearer and joist system as per above
Written report (minimum 250 words) clearly describing the type of platform floor sheeting system you would use, why you have selected that particular product and how you would lay the floor system
Rubric
Module 1 - Project Task 1.2 - Timber Floor Systems
Module 1 - Project Task 1.2 - Timber Floor Systems

 

This Engineering Assignment has been solved by our Engineering Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.
    
Be it a used or new solution, the quality of the work submitted by our assignment Experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.