EG1000 : Design Project 3D Printable Water Pump - Engineering Assignment Help

Assignment Task :

Assessment Requirements: 

Your group is required to submit: 

1) The pump design files to enable the required pump parts to be 3D printed for testing.

2) A report of no more than 12 pages. 

Design Brief 

Your group is required to design a small centrifugal pump for a developing country water supply  application. The minimum specifications for the pump and the design guidelines to be followed are  provided below. You are to follow the 5-step design process and use Solidworks (or similar where  specific arrangements have been made) to design the pump. The pump design is to be 3D printed  from PLA and the design prototype produced will be tested against the provided criteria. 

As a group (of 2) you are responsible for the overall design and performance of the design however, one group member is to be the lead and responsible for the design of the pump impeller and the  other group member is to the lead and responsible for the pump casing. As a group you will still  need to collaborate closely (and virtually) to ensure the two separate components integrate to  ensure overall success of the pump design. Each group member will need to submit separate design  files for the two separate components. Post submission, these design files will be combined, 3D  printed, assembled and tested. The results (and test video) will be provided back to the groups for  inclusion in the final design report.  

Report  

A design report for the groups pump design is required to be submitted and be in a similar format to that used for the first group project. You should follow the same general design outline and format  as previously provided.  

The intent of this project is that your group applies the design process discussed in lectures to your  bridge design. Your report should, therefore, document the design process and record the logic and  reason for your design developed.

It should include (amongst other things): 

• Drawings of the various designs and design elements considered. 

• Test results and details of any resulting modifications. 

• Final design drawings and details. 

• Justification for the design developed.  

• References of any sources of information that you used. 

This Engineering Assignment has been solved by our Engineering Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.