Elements of the Engineering Design Process - Project Execution and Report Details - IT/Computer Science Assignment Help

Assignment Task:

Section I: Introduction 

Please select one topic from the list of approved topics in Section III below. This is a  materials and manufacturing design project that will require engineering design skills. You  will need to be familiar with the materials and processes needed to manufacture all  components of your project, and you will need to describe the processes for producing each  component. 

How You Should Approach This Project: 

This project will teach you to: (1) identify the challenges associated with your project topic  (i.e. define the problem), (2) search in the literature for what others have done, (3) use  creativity and brainstorming to find your own solutions, (4) evaluate your solutions and perform calculations to see if your solution should work, and then (5) further develop this  solution, adding important details, e.g. dimensions, tolerances, materials, CAD drawings,  etc. It is assumed that at least one member of your team is capable of creating computer generated engineering drawings or excellent hand drawings. Finally, during step (6), you  will communicate this selected design and summarize your work by generating a group  project report. In other words, you will be following the engineering design process given below (Fig. 1), from the onset to the end of the project, while skipping the testing and iteration steps (for lack of time to carry these out). 

Fig. 1: Elements of the Engineering Design Process [Source: youtube.com]

Section II: Project Execution & Report Details 

How to Complete The Design Project: 

• Form a team of 2-3 individuals in LMS. We will not allow teams of more than 3 individuals.  If you don’t know anyone, the teaching assistant(s) will help team you up. • Please arrange how you will work electronically with these individuals--without any direct  personal contact (exchange phone numbers, emails, arrange Zoom meeting IDs, etc.). If you are not able to contact these individuals by email/phone, please notify the teaching  assistant(s). 

• Divide tasks for the design engineering and report writing evenly amongst yourselves, so no  one person has too much to do. Anyone who is not participating should be reported to the  teaching assistant(s). 

• Meet electronically for each phase of the design project (each step in Fig. 1). • Brainstorm your collective ideas, document them, analyse them, and choose the winning  design. 

• Justify your choice for this solution by providing calculations of its anticipated performance. • Put additional details into your design choice. This should include engineering drawings  with dimensions, tolerances, and materials for each component. 

• Provide detailed drawings with dimensions for each element (your own work); use CAD or  make hand drawings. 

• Minimize mass or costs by using appropriate materials and design elements.  • Determine workable processes for fabricating or manufacturing each component. • Determine the final assembled mass of your system. 

• Write a final report, as described below. The report must be at least 6 pages long, but no  longer than 7 pages.  

• Each person is responsible for writing approximately 2-3 pages of the report, depending on  team size. You will need to identify who wrote each page and section by placing their name  in the header of each report page (without this, you will not receive credit). • The final report must be uploaded as a single document into LMS by one group member.  

Grading: 

The grade for this assignment is based on your final report. Your individual contribution will  count as 40% of your report grade, based on what we see written by you (no name in header,  no credit). Your group’s proposed solution must meet the performance criteria provided in  Section III, while minimizing the mass (or cost) of your solution. You will be graded on how well  you minimize mass (or cost) yet achieve the performance goal (15% of grade). Make sure you  explain how you would minimize mass or cost by using appropriate materials and design  elements! You will also be graded on the appropriate use of manufacturing processes to  fabricate your system components (15% of grade). Please check for proper English grammar and word usage—and create a well-organized, understandable report (10% of grade). The  references count as 10%. And creativity & usefulness of the solution is worth 10%. 

Final Report Specifications: 

You will need to write a short group report to communicate your solution. It should be in the  following format: The report must be at least 6 pages and at most 7 pages (excluding  references). It should be single-spaced, using Times New Roman 10-point font, with figures 

taking no more than 1/3 of the space on any page. Please do not try to fill space with  unnecessary figures or large titles, and do not leave any large blank spaces in the document.  Please upload the report into LMS as a PDF document. You must have at least 12 references (no partial credit for less than this).  

This IT Assignment has been solved by our IT Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.