Engineering - Laboratory Risk Assessment - Mechatronic Design - Assignment Help

Mechatronic Design Assignment Help

Assignment Help

Question 1  
In this question you are required to conduct a DFMA practice on a simple product – a ‘complex’ Stapler of at least 10 components, which you have by your own. The tasks include:
a) Disassemble the Stapler, name its parts via taking photos to show them and create a Bill of Materials (BOM) for your Stapler;
b) Estimate its production/manufacturing costs; and
c) Through a disassembling and reassembly processing to identify the assembly process (the order of assembling and disassembling), calculate the assembling and disassembling time and assembly efficiency and indicate the difficulties on handling and insertion.

Question 2 
In this question you are required to conduct a DFE practice on the stapler investigated in Question 1. The tasks include:
a) List at least 10 types of environmental impacts over the life cycle of your stapler covering Materials, Production, Distribution, Use and Recovery;
b) Suggest at least five ways to reduce its environmental impacts with the implementation of DFE design guidelines; and
c) Conduct a Qualitative Life Cycle Assessment (LCA) on the stapler analysed using the template table from 3M.

Question 3 
In this question you are required to perform an FMEA analysis based on the pen investigation in both Questions 1 and 2 and the tasks include:
a) Identify EVERY Way in Which Part Can FAIL; i.e., determine the Failure MODES; and
b) Analyse the CONSEQUENCES of Every Failure; i.e., determine the EFFECTS.
The MS EXCEL Spreadsheet available in the vUWS site only shows you a template to generate an FEMA report. You may create the FEMA Report using a spreadsheet based on this template.
Question 4  Risk Assessment:
In this question you are required to perform a risk assessment for the stapler investigated in Questions 1-3, which may be readily available to students both at home and university as a stationary instrument, the risk level, or the category rating, or safety integrity level, or performance level via using a three-step procedure,
respectively. A Template used for SCEM Lab Risk Assessment is available in the vUWS site for you as reference to create your own one.

This  Engineering Assignment has been solved by our Engineering experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.