Enterprise Routers and Operating Systems - Internet Protocol - Network Topology - Routing and Security Protocols - IT Assignment Help

Assignment Task:

Your trainer/assessor will also ensure that you have access to each of the following for your assessment:
 
• A physical site where network installation may be conducted or simulated environment 
• Enterprise routers and operating systems 
• Hardware and/or software 
• The organisational guidelines 
• Computers 
• Diagram 
• IP addressing (Will be provided by Trainer) 

During your assessment, you will need to: 

1. Plan and prepare for the installation of an enterprise router.
2. Design a classless internet protocol (IP) addressing scheme, to suit requirements.
3. Install, configure and test the network elements, to ensure interoperability within the network.
4. Apply network topologies, routing and security protocols.
5. Apply solutions, and troubleshoot any defined network problems.

Once you have completed the practical aspect of this activity, you will need to write a report discussing how you performed each of the following tasks:
 
1. Prepare all required devices, cables & connectors considering WHS in place.

2. Go through the network design documentation to make sure they are current and complete. Provide a reason why they are complete or what is incomplete.

3. What network elements are required to be installed to meet the technical requirements?

4. Write an email to the vendors and service suppliers in order to get all required devices, access codes and any other required information. Be specific with the model, parts, size you need. 

5. Develop plans for the network installation. These items must not be missed in the plan.

a) Arrange tasks in priority based.
b) Ensure minimal or no disruption to the client while working on network installation and configuration?
c) Define the date and time of your planned installation

6. Contact your client to get:

a) Approval for your plan.
b) Access to the network facility

7. What information is required before configuring routing in a cisco router?

8. What are the router operating parameters?

9. Make a list of appropriate cables, ports, and connectors to connect routers to other network devices and hosts.

10. Using a console cable, connect the router and apply the basic configuration.

11. Check the firmware version of the router and upgrade if not current.

12. Save your work and back it up to a TFTP server.

13. Apply basic router security.

14. As provided network diagram, configure static and default routes in the Brisbane router.
 
15. Determine and calculate an addressing scheme using VLSM and summarization to satisfy addressing requirements in a local area network (LAN) or a wide area network (WAN) environment. 

16. Configure the classless routing protocol (RI Pv2 or OSPF or EIGRP) using the addressing scheme prepared previously and test connectivity between Sydney and Melbourne PCs.

17. Identify and correct problems associated with IP addressing and host configurations using utilities.

18. Perform basic troubleshooting principles to verify the network's operation.

This IT Assignment has been solved by our IT Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.