How To Configure VLANs On the Catalyst Switches

Assignment Task

You suppose to configure from the file. There are two files (stpTest1.pka & stp Test2.pka), choose the one that matches your topology. Configure the network so that the root bridge (marked by instructor) and the blocked port match the diagram below. There can only be one spanning tree. You cannot change the root bridge of the network. You cannot shutdown any ports or rename or remove any switches or cable. The rest of the thing you can do. Kindly ensure that those ports marked as "X" by instructor are blocked. 1 mark for each working diagram.

Note: There may be some spanning tree topology that + ver be generated by (STP) spanning tree protocol. If you think a specific topology cannot be generated by STP protocol then you may want to mark it as not POSSIBLE. If its turn out to be true, 1 mark will be awarded. If its turn out to be false, mark will be deducted. If you leave it unanswered, then no mark will be awarded or deducted. In case of dispute, you strongly believe the topology is impossible to be done, you can openly challenge me to give you the answer, if the answer is given, a minimum of marks will be deducted. Vice-versa. One mark will be deducted if you state a diagram as correctly done(possible) but was wrongly done (incorrect block port or root bridge). You must show in exact sequence just like the given diagram. No mark will be given for out-of-sequence diagram. For example, topology 2 shown in topology 6 etc.

This Engineering has been solved by our PHD Experts at My Uni Paper.