Install, Configure and Test a Wireless Network - IT/Computer Science Assignment Help

Assignment Task:

Task: 

This assessment is my original work and no part of it has been copied from any other source except where due acknowledgement is made.
No part of this assessment has been written for me by any other person except where such collaboration has been authorised by the assessor concerned.
I understand that plagiarism is the presentation of the work, idea or creation of another person as though it is your own. Plagiarism occurs when the origin of the material used is not appropriately cited. No part of this assessment is plagiarised.
Student signature and Date
Assessment instructions
Table SEQ Table \* ARABIC 1 Assessment instructions
Assessment details Instructions
Assessment overview The objective of this assessment is to assess your skills in setting up a small wireless network.
Assessment Event number 2 of 2
Instructions for this assessment This is a skill-based assessment and will be assessing you on your ability to demonstrate skills required in the unit.

• This assessment is in two parts:
• Install, configure and test a wireless network
• Monitor and administer a wireless network.
• This assessment is supported by the following:
• Assessment Feedback.
• Submission instructions On completion of this assessment, you are required to submit your work to your assessor for marking (as instructed by your assessor).
• You are required to submit the following files:
• Completed Packet Tracer file, named ICTNWK405_Packet_Tracer_File_<Your_Name>.pkawhere <Your_Name> is your full name.
• This updated assessment item.
• Ensure you have written your name at the bottom of each page of this assessment.
• It is important that you keep a copy of all electronic and hardcopy assessments submitted to TAFE and complete the assessment declaration when submitting the assessment.
• What do I need to do to achieve a satisfactory result? To successfully complete this assessment the student will be available at the arranged time to complete all the assessment criteria as outlined in the assessment instructions.
• All parts of the observable task must be performed to a satisfactory level as indicated in the criteria section of the Observation Checklist.
• All oral questions must be answered correctly to be deemed satisfactory in this assessment task; however, Assessors may ask questions to clarify understanding.
• What do I need to provide? USB drive or other storage method with sufficient free space to save work to.
• Integrated Services Router (ISR)
• Wireless network
• Windows Performance Monitor (part of Windows operating system)
• If you do not have this equipment available to you at home then your assessor will make alternative arrangements.
• What will the assessor provide? Smith & Jones Consulting scenario Smith_and_Jones_Consulting.pdf
• Cisco Packet Tracer 7.2 (or later)This is available from https://www.netacad.com/courses/packet-tracer
• Packet Tracer file ICTNWK405_Packet_Tracer_File.pka
• Personal Computer with internet access.
• Due date/time allowed/venue Indicative time to complete assessment:
• Two hours.
• Assessment feedback, review or appeals Appeals are addressed in accordance with Every Student’s Guide to AssessmentSpecific task instructions
• The instructions and the criteria in the tasks and activities below will be used by the assessor to determine whether the tasks and activities have been satisfactorily completed. Use these instructions and criteria to ensure you demonstrate the required skills and knowledge.
•  
• Part 1: Install, configure and test a wireless network
• To complete this assessment, you will be required to participate in a practical demonstration of how to complete a task or activity. These practicals will be observed by your assessor. Your responses will be used as part of the overall evidence requirements of the unit.
• Once completed you will need to submit this assessment and the tasks and activities you are required to complete to your assessor for marking.
• Background scenario – Smith & Jones Consulting
• Please refer to the supplied scenario Smith & Jones Consulting scenario (Smith_and_Jones_Consulting.pdf).
• Smith & Jones Consulting has an in-house IT department headed by Janet Twomey (the IT manager). Due to time constraints they have decided to outsource the initial installation of the network and server upgrades to a local company specialising in this area. After the new network is installed it will be maintained by the in-house IT department.
• Smith & Jones Consulting, on the recommendation of Janet Twomey (the IT manager), has authorised you to implement a wireless network to provide secure network access for all wireless and portable devices of employees.
• After much investigation you have determine the network configuration requirements for Stage 1 of this project. You are now required to implement this Stage 1 network according to these configurations. (Refer to the following Project resources for the network configuration requirements).
•  
• Project Resources
• The following details the network configuration requirements for Stage 1 of this project.
• Figure SEQ Figure \* ARABIC 1 Network topography diagram
•  
• Client settings
• Table SEQ Table \* ARABIC 2: Client settings
• Settings Lawyer 1 laptop Lawyer 2 laptop James Smith PC Roberta Jones PC
• IP address DHCP DHCP DHCP DHCP
• Network SSID Wi-Fi Ground Wi-Fi Level 1 Wi-Fi Level 2 Wi-Fi Level 3
• Authentication WPA2 WPA2 WPA2 WPA2
• User ID lawyer lawyer James Roberta
• Password wifipass wifipass Smith Jones
• Encryption type AES AES AES AES
• Wi-Fi access point
• Table SEQ Table \* ARABIC 3: Wi-Fi access point configuration settings
• Settings Wi-Fi Ground Wi-Fi Level 1 Wi-Fi Level 2 Wi-Fi Level 3
• Connection of internet port Switch port Fast Ethernet 0/2 Switch port Fast Ethernet 0/3 Switch port Fast Ethernet 0/4 Switch port Fast Ethernet 0/5
• Internet
• IP configuration Static Static Static Static
• IP address 192.168.1.5 192.168.1.6 192.168.1.7 192.168.1.8
• Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
• LAN
• IP address 192.168.10.1 192.168.11.1 192.168.12.1 192.168.13.1
• Subnet mask 255.255.255.0 255.255.255.0 255.255.255.0 255.255.255.0
• DHCP
• DHCP Enabled Enabled Enabled Enabled
• Start IP 192.168.10.100 192.168.11.100 192.168.12.100 192.168.13.100
• Wireless
• Network SSID Wi-Fi Ground Wi-Fi Level 1 Wi-Fi Level 2 Wi-Fi Level 3
• Authentication WPA2 RADIUS Server IP WPA2 RADIUS Server IP WPA2 RADIUS Server IP WPA2 RADIUS Server IP
• Address 192.168.1.2 192.168.1.2 192.168.1.2 192.168.1.2
•  
• RADIUS server
• Table SEQ Table \* ARABIC 4: RADIUS server configuration settings
• Settings
• Fast Ethernet 0
• IP type Static
• IP address 192.168.1.2
• Subnet mask 255.255.255.0
• AAA
• Service On
• Port 1645
• Network configuration
• Client name Wi-Fi Level 3 Wi-Fi Level 2
• Client IP 192.168.1.8 192.168.1.7
• Server type RADIUS RADIUS
• Secret itsasecret itsasecret
• User setup
• Username lawyer
• Password wifipass
•  
• Task
• In this part of the assessment your task is to build a network following the topology shown above in the Network Topology diagram (Figure 1).
• This has been broken down into the following sections:
• Section 1: Prepare network environment
• Section 2: Configure wireless network, security and other key parameters
• Section 3: Check progress
• Section 4: Test and troubleshoot wireless network
• Section 1. Prepare network environment
• In this section you will be creating your network environment in Cisco Packet Tracer.
• Step 1.1: Load the network configuration files
• Open ICTNWK405_Packet_Tracer_File.pka with Cisco Packet Tracer to implement the network.
• You will notice that some configurations have already been completed. This includes all required devices having already been positioned on the workspace.
• Hint: Checking settings
• To check what other settings have already been completed, look at the Activity window, click on the button and then select the Assessment Items tab. Listed are all the Assessment Items and their completion status. A green tick indicates the Assessment Item is already complete.
• Save your file as ICTNWK405_Packet_Tracer_File_<Your_Name>.pka where <Your_Name> is your full name.
• -1355-23800Make sure that you regularly save your file so that you do not lose any of your work.
•  
• Section 2. Configure wireless network, security and other key parameters
• Complete each of the following steps in order using the settings supplied in the nominated table.
• The above tables contain settings and configurations that have been determined from the commercial and business requirements for Smith & Jones Consulting’s wireless network. This includes wireless, security and other key parameters.
• Note: Some settings have already been set. Please refer to Hint: Checking settings above to determine these settings.
• Step Table
• Configure client machines Table 2: Client settings (on page 7)
• Note: One PC is a legacy PC and may require installation of a wireless IEEE802.11n compatible NIC before it can be configured.
• Install and configure wireless access point Table 3: Wi-Fi access point configuration settings (on page 8)
• Configure RADIUS server Table 4: RADIUS server configuration settings (on page 9)
• Section 3. Check progress
• Step 3.1: Check progress
• To check that all settings have been completed, look at the Activity window. At this stage your completion percent in the bottom right corner will not be 100%.
• You can check this by clicking on the button and then select the Assessment Items tab. Listed are all the Assessment Items and their completion status. A green tick indicates the Assessment Item is complete.
• You may see a list of incomplete Assessment Items by clicking the under the Assessment Items tab. If you have not correctly completed all Assessment Items then revise your work until they are all correct.
•  
• Section 4. Test and troubleshoot wireless network
• Step 4.1: Verify network connectivity.
• Use the ping command to test connectivity between all network devices.
• Use the following table to methodically verify and document connectivity with each network device.
• From To IP Address Ping results
• RADIUS Server Switch0 Switch0 Wi-Fi Ground Switch0 Wi-Fi Level 1 Switch0 Wi-Fi Level 2 Switch0 Wi-Fi Level 3 Lawyer 1 laptop Wi-Fi Ground Lawyer 2 laptop Wi-Fi Level 1 James Smith PC Wi-Fi Level 2 Roberta Jones PC Wi-Fi Level 3 Step 4.2: Record the troubleshooting process and configuration changes
• Take corrective action to establish connectivity if a test fails. Record this in the Troubleshooting Log below.
• Note: Errors have been deliberately including in the supplied network settings. This is so that you can work through and document a troubleshooting process. This will mean that at the end of troubleshooting process you will have a completion percent of 100%.
•  
• Use this log to document your actions and results during the troubleshooting process. List the steps you took to gather information and, as you progress, record your thoughts as to what you think the problem might be and what actions you took to correct the problems.
• Table SEQ Table \* ARABIC 6 Troubleshooting log
• Device Problem, Actions and Results
• Section 5. Configure and test security and firewall arrangements
• Step 5.1: Configure and test firewall
• Test access to both www.goodsite.com and www.badsite.com using the built in browser tool of the Lawyer 1 laptop.
• www.badsite.com contains material that is not appropriate for guests to the company network, so access should be blocked for everyone on the ground floor.Implement this blocking in the built-in firewall filter of the Wifi Ground wireless device.
• Test that this has been done using the built-in browser tool for the Lawyer 1 laptop connected to Wifi Ground.
• Capture a screen shot to show that www.badsite.com has been blocked and www.goodsite.com is still available. Include this in the table below.
• Step 5.2: Configure and test security settings
• It has been noted that there is a security risk associated with the FTP service on the RADIUS server. Users are able to quickly work out how to log onto the FTP service and are then able to delete files.
• Update the FTP service settings on the RADIUS server to eliminate this risk.
• Test that the changes you have made have worked using the command prompt tool on Lawyer 1 laptop. To access FTP, you will need to enter the following command:
• C:\>FTP 192.168.1.2
• Include screen shots and brief descriptions to provide evidence of your work in the table below.
•  
• Part 2 – Monitor and administer a wireless network
• Equipment
• For this part of the assessment you will need the following equipment:
• Integrated Services Router (ISR)
• Wireless network
• Windows Performance Monitor (part of Windows operating system).In Windows 10, you can use Performance Monitor to analyse data, such as processor, hard drive, memory, and network usage. Refer to help with the Windows Performance Monitor for help.

The above  IT Assignment has been solved by our  IT Assignment  Experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.