MP2715 Computer Aided Design And Simulation Assignment

Assignment Task

Brief – Centrifugal Clutch Design

The aim of this assignment is to use industrial CAD systems to solve an engineering design problem. 

Using a range of CAD and Simulation tools you are to design a Centrifugal Clutch. The assessment will be based on a Design Report highlighting your design work and use of CAD to solve an engineering problem.

The report will contain the following elements: 

• Analysing Hardware requirements for CAD
• 3D CAD Modelling
• 2D Drawings for Manufacture
• FEA Analysis of a Clutch Shoe
• Motion Analysis of the Clutch

This is an individual assignment; you are to design a suitable centrifugal clutch to match a specific engine. An engine specification will be given to you and will be different for each student.

Learning Outcomes

1. Analyse and compare the hardware requirements of different CAD systems. Identify and distinguish between the different types of CAD software: 2D draughting, 3D modelling (wire-frame, surface, solid), and other relevant systems

2. Use industrial standard CAD systems to produce the following: 3D CAD models, 2D engineering drawings.

3. Use industrial standard CAD and FEA systems to solve engineering design problems.

4. Analyse and model engineering situations using ordinary differential equations and solve ODEs.

5. Solve mathematical models of physical systems using simulation methods.

Technical Requirements

• The clutch must be designed to fit the Power-Take-Off shaft (PTO).
• The clutch must not engage when the engine is at idle (below 1500 rpm unless stated otherwise in the engine specification)
• The engagement of the clutch should be gradual from just above idle rpm up to the rpm at the start of the recommended operating speed range of the engine
• Clutch must not slip at peak torque.

Engine Specifications

An engine specification will be given to you from the range of small Honda Engines. (do not choose your own) The Honda GX GC or GS engine range is a popular range of engines for a wide range of applications and it is common to use Centrifugal Clutches on these engines.

Each engine specification contains Performance Curves for information on Power, Torque and Engine Speed (rpm) as well as Technical Drawings of the PTO shaft. (Power Take-off shaft). Samples are shown below – Note: your engine specification may be different to these.

Design Report

You will be assessed via a Design Report, liberally illustrated Technical Report. Most of the content is expected to be detailed Screen Shots/Images of your design. Graphical Results of your Motion Simulations are also expected. The report should also include initial design concepts and calculations related to the design.

It should be written in 3rd person, past tense with a logical numbered Chapter system. Research used for Part 1 should be correctly referenced

Report Structure:

 1. Analyse and compare the hardware requirements of different CAD systems. Identify and distinguish between the different types of CAD software: 2D draughting, 3D modelling (wire-frame, surface, solid), and other relevant systems

(a) Research typical CAD/PC systems used currently in industry. Consider PC / Hardware requirements for different CAD systems (include Processor/s, Monitors, Graphics Cards, Digitisers, RAM, Print/Plot devices). Describe how these might be configured in a typical Design Office.

(b) Show examples of the different types of CAD used in industry, include examples of 2D Drawing, 3D Solid Modelling, 3D Wire-Frame/Surface Modelling and any other relevant systems. Do not include vendor names of software i.e. SolidWorks, Catia, AutoCAD. Focus on the different types of CAD software that is available.

 2. Use industrial standard CAD systems to produce the following: 3D CAD models, 2D engineering drawings.

With appropriate Screenshots and Descriptions show 3D Models and 2D Drawings of your design with descriptions to

(a) 3D CAD Part Models of Clutch Design

(b) 3D Assembly of Clutch Design

(c) 2D Detail Drawings of parts to be Manufactured i.e. Drum, Shoes, Backplate etc. (do not include standard parts i.e. nuts, bolts, springs, fasteners etc.)

 3. Use industrial standard CAD and FEA systems to solve engineering design problems.

(a) Initial design calculations to predict behaviour of clutch design and establish boundary conditions.

(b) FEA Simulation of Clutch Shoe under maximum load conditions

(c) Motion Analysis of Clutch to show engagement

This Engineering has been solved by our PhD Experts at My Uni Paper. Our Assignment Writing Experts are efficient in providing a fresh solution to this question. We are serving more than 10000+ Students in Australia, the UK, and the US by helping them to score HD in their academics. Our Experts are well-trained to follow all marking rubrics and referencing styles.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction