Network Connectivity Pinging from PC0 to Server0 - IT Assessment Answer

ITNE2003: IT Assessment Task

This assessment item relates to the unit learning outcomes as in the unit descriptors. It checks your understanding about configuring and troubleshooting medium-size networks.
In this assignment you will demonstrate your knowledge and skills in subnetting an IP address space, configuring RIPv2 and OSPF routing protocols as well as NAT.

Subnet the following IP network: 160.1XY.0.0/16 (XY is the last two digits of your Student ID) to accommodate 5 subnets, each subnet will subsequently have 300, 180, 65, 30 and 4 PCs. For each subnet find the subnet mask, network ID, broadcast IP and valid host range and complete the below table:

Based on the given topology, complete the following tasks in packet tracer and provide the screenshots of your configuration in your report.

1. Design IP plan for the network
2. Configure IP address for the PC and server
3. Configure static routing for the network
4. Configure RIPv2 for the network
5. Show the routing table of each router
6. Show the network connectivity pinging from PC0 to Server0
7. Using an IP access list, block the traffic going from PC0 to Server0 and provide the screenshots of failed pings from PC0 to Server0.

You are hired by VIT to implement the network given in the diagram below:

a. IPv4 addressing plan 

b. What would be the command to add a default static route for your entire network design from the HQ router to the ISP router?
c. What would be the command to add a default static route on the West router to send traffic for all unknown destinations to the HQ router?
a. The Branch 4 router requires a static route for traffic destined for Branch 3. All other traffic should be sent to the East router using a default static route. What commands would be used to accomplish this?
b. Configure OSPF in the given topology and provide the screenshots of the OSPF configuration, routing table of each router and the result of connectivity between following PCs:
• PC1 and PC2
• PC3 and PC4
• PC5 and PC7
c. Configure NAT on router HQ to translate the local network addresses to a public IP address used in HQ-ISP network.

This ITNE2003 IT Assessment has been solved by our IT experts at onlineassignmentbank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.