Push-Buttons that Will Control an Oil Pump - Engineering Assignment Help

Assignment Task

Project
You have start/stop push-buttons (must be labeled) that will control an oil pump. This oil pump must run at all times when you are using the wood splitter. The pump is self-regulating. (The pump will maintain at the proper pressure of 100 PSI).
You have an extend push-button (normally open, labeled extend) that will open Valve 2 (V2) to force the cylinder to extend, and Valve 3 (V3) will open to allow the oil in the cylinder to return to the tank.
You have a retract push-button (normally open, labeled retract) that will open Valve 1 (V1) to force the cylinder to retract, and Valve 4 (V4) will open
to allow the oil in the cylinder to return to the tank.
A pressure switch (P1) will activate Valve 5 (V5) to release pressure from the pump back into the tank if pressure exceeds 120 PSI
A low-level float switch (L1) set at 40 % of the total tank will give a red light indication (Located inside the oil tank)
A low, low-level float switch (L2) set at 10 % of the total tank will stop the pump (PUMP 1) or prevent it from starting. (Located inside the oil tank)
A limit switch (LS1) will stop the cylinder from overextending.
A limit switch (LS2) will stop the cylinder from over retracting.
A temperature (T1) switch inside the tank rises above 120 degrees C the wood splitter motor stop).
Motor overload elements will stop the Pump motor.

Special notes
The oil pump is rated at 208 Volts, 3 phase (must use a three-phase contactor)
All the control device will be at 120 volts
All contractors, if needed, will be labeled (C1, C2, C3, ...),
All control relays, if needed, will be labeled (CR1, CR2, CR3, ...)

This Engineering Assignment has been solved by our Engineering experts at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.
Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.