Roof Truss Systems - Dutch Gable - Building and Construction Assignment Help

Assignment Task:

PART A
What do I need to do?
Framed Roof Systems
The Architect for Project No. 33837 (PDF file with Project #33837 attached separately)  has suggested that the roof truss system be replaced with a conventional roof system to reduce the load on the lower story lintels.
He has provided you with the plan and asked you to sketch in the framing components required and provide the sizing of the key components. You can use either AS1684-2010 nominated components or provide a solution using engineered timber members.
Refer to provided PN33837 Leary_Ave- Plane Pack PDF PDF file attached separately and Framed Roof System Worksheet 1 in the Assessment Task Worksheets -Low Rise Structures PDF file attached separately.
•Determine the design requirements to meet structural compliance.
•Sketch your design solution on the plan (on the worksheet provided) and provide the additional component sizes.
•Discuss the implications of the design change on the structural integrity of the other parts of the building structure including any changes that would be required to ensure the new design meets the requirements of the codes and standards.
How will I be assessed for this task?
For this task you are required to submit the following:
•Completed report clearly describing the implications of the design change on the structural integrity of the other parts of the building structure including any changes that would be required to ensure the new design meets the requirements of the codes and standards.
•Report must be a minimum of 150 words
•Sketch of the design solution using the worksheet provided Framed Roof System Worksheet 1 below.

PART B
What do I need to do?
Roof Truss Systems
The carpenter has called and asked advice for the completion of the roof truss installation for Project No.33837. He has stated that there are some trusses left over.
You arrive on site and find the truss erection is almost complete but there are no connectors or bracing in place.
Refer to the Assessment Task Worksheets – Roof Truss System Worksheet for this task:
•On the worksheet provided (Roof Truss System Worksheet in the Assessment Task Worksheets - Low Rise Structures), you are required to indicate: 
oThe bracing configuration for the roof.
oAll of the connections are skew-nailed. For the connections four connections marked on the drawing, identify the members being connected and the connections you want the carpenter to fit to those locations indicated and why.
oWhere the remaining trusses need to be installed.
•Write a Site Instruction to the carpenter to accompany the sketch advising: 
oWhat remains to be completed
oWhere the incomplete items are
oHow it should be completed
oWhen it should be completed
How will I be assessed for this task?
For this task you are required to submit the following:
•Completed worksheet clearly indicating the above requirements
•Site instructions to the carpenter advising the above requirements and the sketch
•Site instructions can be in an email format and must be a minimum of 100 words

PART C
What do I need to do?
Roof Truss Systems
To ensure that all of the Truss roofs you get installed on your projects are installed correctly, write an installation procedure and checklist that can be used by the subcontractors to install Truss Roofs including the following roof type.
•box gable
•dual pitch roof
•Dutch gable
•Dutch hip
•gable end
•hip and valley
•north light
•skillion
How will I be assessed for this task?
For this task you are required to submit the following:
•Completed installation procedure
•Checklist for use by the subcontractors

This Building and Construction Assignment has been solved by our Building and Construction Experts at onlineassignmentbank. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing style.

Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turnitin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.