Sampling and Analysis Plan ( SAP ) - Science & Math's Assignment Help

Assignment Task

Task 

Introduction:

A SAP (Sampling and Analysis Plan) documents the procedures and analytical requirements for sampling activities that are performed to collect environmental samples (soil, air, water or biological materials) and to determine whether these exceeding thresholds. The thresholds could be statutory requirements or guidelines. 

What should be included in a basic SAP will vary from jurisdiction to jurisdiction. However, most guidance on SAPs suggests the following elements should be included:

• The objectives of the sampling program
• Background on the site, including maps
• The types of samples to be collected (e.g. sediment, water…)
• Sample collection design (the spatial and temporal pattern of sampling)
• Methods

1. sample containers, 
2. sampling devices and equipment, 
3. sample preservation
4. equipment decontamination procedures, 
5. sample handling procedures and 
6. reference to recognised protocols

• Analytes of Concern
• Analytical Procedures, with reference to recognised protocols or standard methods
• Environmental Quality Guidelines (what guidelines or standards will be dapples be compared against to determine environmental acceptability)
• Disposal of Residual Materials
• Anticipated Cost
• Quality Assurance and Quality Control procedures.

Your major assignment for the unit (Assignment 3, not this assignment) is to undertake a study to identify which  of the Main Drains entering the Canning Estuary should be a priority for management (i.e. the priority drains).  To do this, you would need to collect data on the water quality of the drains and the water entering the Canning River Estuary. This would normally be done through a monitoring programme, which would be described in a Sampling and Analysis Plan. 

The Assignment: 
For this assignment, you are required to produce a SAP that defines the sampling and analysis required to determine the water quality (nutrients and metals) of the main drains entering the ‘Canning River Estuary ‘ portion of the Swan and Canning Rivers Estuary (Fig. 1), and to identify the drains which should be a priority for management attention. 

What Your Sap Should Contain:

• The objectives of the sampling;
• Define the study site;
• Outline the known environmental history of the study site;
• Outline the intended sampling design (spatial and temporal);
• State or refer to the field sampling methods
• State the analytes of interest;
• State or refer to the laboratory analysis;
• Define any guidelines or standards that should guide the collection and analysis of samples;
• Define any guidelines or standards that be used as criteria to assess water quality and identify priority drains for management attention.

Structure of the SAP
Using the SAP Guidelines (Australia) or the SAP Template (US EPA) as a guide for the structure of your SAP  (see ‘Supporting Documents’, below).

Assessment criteria

The marking for the assignments will be based on the satisfactory inclusion of the following components:

Presentation

• Structure of the SAP is clear, logical and contains the key components advised in the reference materials

Content

• Objectives of the sampling are clearly articulated and feasible.
• Historical sampling data and studies are appropriately referred to, summarised and referenced.
• The types of samples to be collected are clearly explained.
• The analytes are clearly listed.
• The spatial and temporal design of the sampling is explained and is appropriate to meet the objectives.
• The sampling methods are clearly and concisely explained or appropriate reference to reliable sources is provided.
• Sample storage and preservation is described or appropriate reference to reliable sources is provided.
• The laboratory analytical methods are clearly and concisely explained or appropriate reference to reliable sources is provided.
• Standards or Guidelines that will be used for assessment of monitoring samples/data are clearly stated and their appropriateness is justified.

This Science & Maths Assignment has been solved by our Science & Maths Expert at My Uni Paper. Our Assignment Writing Experts are efficient to provide a fresh solution to this question. We are serving more than 10000+ Students in Australia, UK & US by helping them to score HD in their academics. Our Experts are well trained to follow all marking rubrics & referencing Style. Be it a used or new solution, the quality of the work submitted by our assignment experts remains unhampered. 

You may continue to expect the same or even better quality with the used and new assignment solution files respectively. There’s one thing to be noticed that you could choose one between the two and acquire an HD either way. You could choose a new assignment solution file to get yourself an exclusive, plagiarism (with free Turn tin file), expert quality assignment or order an old solution file that was considered worthy of the highest distinction.